Related Manuals for MKS Ophir LaserStar
Summary of Contents for MKS Ophir LaserStar
- Page 1 (217) 352-9330 | Click HERE Find the MKS Instruments / Ophir LaserStar at our website:...
- Page 2 4.2. To Set Type of Laser Being Used 1. From main screen, press “laser” until the correct laser type or wavelength is displayed in the upper left corner of the display. (For PD10 type sensor, press “menu” then “go” until the correct laser type or wavelength is displayed).
- Page 3 Thermal Sensors To subtract background and set current reading to zero: 3.3. Setting the Startup Configuration 1. From the main power measurement screen press “offset”. 1. From the power measurement mode, press the menu button and select 2. Press “offset” again to cancel. See Section 4.4.2.2. of the main manual 2.1.
Need help?
Do you have a question about the Ophir LaserStar and is the answer not in the manual?
Questions and answers