Safety Information; Obtaining Technical Assistance; Specifications - Arista 7000 Series Quick Start Manual

Safety Information

Important! Class 1 Laser Product: This product has provisions to install Class 1 laser transceivers which provide
optical coupling to the communication network. Once a Class 1 laser product is installed, the
equipment is a Class 1 Laser Product (Appareil à Laser de Classe 1). The customer is responsible for
selecting and installing the Class 1 laser transceiver and for insuring that the Class 1 AEL (Allowable
Emission Limit) per EN/IEC 6-825, CSA E60825-1, and Code of Federal Regulations 21 CFR 1040 is
not exceeded after the laser transceiver have been installed. Do not install laser products whose class
rating is greater than 1. Refer to all safety instructions that accompanied the transceiver prior to
installation. Only Class 1 laser devices, certified for use in the country of installation by the cognizant
agency are to be utilized in this product.
Important! Ultimate disposal of this product should be in accordance with all applicable laws and regulations.
1.4 Safety Information
Refer to the Arista Networks document Safety Information and Translated Safety Warnings available at:
http://www.aristanetworks.com/en/support/docs/eos
1.5

Obtaining Technical Assistance

Any customer, partner, reseller or distributor holding a valid Arista Service Contract can obtain
technical support in any of the following ways:
• Email: support@aristanetworks.com. This is the easiest way to create a new service request.
Include a detailed description of the problem and the output of "show tech-support".
• Web: www.aristanetworks.com/en/support.
A support case may be created through the support portal on our website. You may also download
the most current software and documentation, as well as view FAQs, Knowledge Base articles,
Security Advisories, and Field Notices.
• Phone: 866-476-0000 or 408-547-5502.
Important! No user serviceable parts inside. Refer all servicing to qualified service personnel.
1.6

Specifications

Table 1-1 lists the specifications of Arista Data Center switches covered by this guide.
Table 1-1 Switch Specifications
Size
Weight
2
all switches
all switches
all switches
DCS-7048T-A
DCS-7050Q-16
DCS-7050QX-32
DCS-7050S-52 / DCS-7050S-64
DCS-7050T-36
DCS-7050T-52 / DCS-7050T-64
DCS-7124FX
DCS-7124SX
DCS-7150S-24
DCS-7150S-52 / DCS-7150S-64
Quick Start Guide: 7000 Series 1 RU-Gen 2 Data Center Switches
Height: 44 mm (1.75 inches) – 1 RU
Width: 445 mm (19 inches)
Depth: 406 mm (16 inches)
7.7 kg (17 pounds)
8.2 kg (18 pounds)
9.1 kg (20 pounds)
7.7 kg (17 pounds)
8.2 kg (18 pounds)
9.5 kg (21 pounds)
8.2 kg (18 pounds)
7.7 kg (17 pounds)
8.2 kg (18 pounds)
8.6 kg (19 pounds)
Overview