Table of Contents
Advertisement
During moving XY motors, if the signal of the
origin sensor changes, the icon displayed on the
screen will become shadowed.
2)
XY Motor Origin Adjustment
First press
key to conduct XY origin search.
On the screen will be displayed the origin sensor
status A of X motor and the current adjustment
value C, as well as the origin sensor status B of Y
motor and the current adjustment value D.
Press the
key and
motors respectively step by step and the adjustment
value will change simultaneously. Observe the
center of the presser foot and the position of needle
hole. When they overlap, press
the adjustment value and return. If user doesn't want
to save the adjustment value, press
key to give up the saving.
2.3.3 03 Aging Mode
2.3.3 03 Aging Mode
After selecting "03 aging mode", press
conditions, activate the continuous running mode; turn off the power to release the continuous running mode.
1)
Interval Time Setting
When the screen displays "(01) aging interval",
press
key to set the interval time between
two operations.
The setting range: 0~9900ms (by an increment of
100ms); default value: 2000ms.
2)
Origin Search at Sewing End
Press
key to shift to "(02) origin search" to set the origin search at sewing end.
OFF: invalid (default)
ON: valid (origin search at each sewing end)
After setting, press
3)
Continuous Operation
Under sewing mode of normal patterns, user can set pattern No., X/Y scale rate, max. rotation speed and other
key to move X/Y
key to save
key or
key to enter continuous running mode. After setting its
key to save and enter the main interface of normal sewing mode.
63
– 8 –
C
A
D
B
Advertisement
Table of Contents
