Table of Contents
Advertisement
Code
Name
The Storage Space for
M-318
External Patterns Full
External Patterns
M-319
Format Abnormal
Imported Pattern
M-320
Already Exist
Imported Pattern Not
M-321
Found
M-322
Pattern Deletion Error
M-323
Pattern Read Error
USB Device Not
M-324
Connected
The Size of Imported
M-325
Pattern Too Large
External Pattern Not
M-326
Found
P Pattern to Be Deleted
M-327
is Cited by C Pattern
USB Patterns Not
M-328
Found
M-329
No Registered P Pattern
All Normal Patterns
M-330
Shut Down
No More Registration of
M-331
P Patterns
No Deletion of the Last
M-332
C Pattern
Content
When patterns are imported to the
control panel via USB, the storage space
for such patterns is found full.
Pattern data is found abnormal when its
format data is read by the control panel
When importing pattern from USB
storage device, pattern with the same
number is found to exist already in the
panel.
When importing pattern from USB
storage device, the pattern to be
imported is not found.
When deleting external pattern, it is
found to be not exist.
There is problem with reading pattern
data from external pattern storage area.
When importing or exporting patterns,
the panel detects abnormal USD storage
device.
When importing patterns, the panel
detects that the imported pattern is too
beyond the size limitation.
Under sewing ready status, the external
pattern to be read is not found.
When being deleted, the P pattern is
found to have been added to certain C
pattern.
The pattern number to be imported can't
be found after USB connection
Before entering the P pattern or C
pattern copy/deletion mode, no P pattern
has been registered.
Before entering P pattern registration
mode, all normal patterns are found to
have been shut down.
Before entering P pattern registration
mode, it is found that all P patterns have
been registered.
The C pattern to be deleted happens to
be the last one.
106
– 51 –
Solution
First export the internal patterns before
deleting them, and then import patterns again.
Enter the parameter import/export mode of the
system and delete such patterns.
Change the number of the pattern in the USB
storage device to be imported.
Select existing patterns in the USB storage
device.
Select existing pattern for deletion.
Please select other patterns.
Change another USB storage device
Make sure the imported pattern is within the
size range.
Please select other patterns.
First delete the P pattern from the C pattern and
then delete the P pattern.
Make sure the pattern is correctly named and
saved under the designated directory of the
USB storage device.
Please register P patterns before entering those
modes.
Please unlock normal patterns.
Please delete some P patterns before
registering new ones.
The deletion of the remaining last C pattern is
prohibited.
Advertisement
Table of Contents
