JUKI K-1E Instruction Manual page 25

2)
Press key to set the standard pattern as No.3.
Press to set P-No. as 2. Press READY key to
register P2 and the mode interface will be displayed.
Then press key or
3) Press key and then press
item data.
4) Set separately the X scale rate as 50%, Y scale rate
as 80%, sewing speed as 2000 sti/min and thread
tension as 50.
5) Press key and X scale rate will be displayed
as 0.0. the increment of X direction movement can
be set as 0.1mm. Press
data into 0.5.
6) Press key and X scale rate will be displayed
as 0.0. The increment of X direction movement can
be set as 0.1mm. Press
data into 1.0.
7) Press key to complete setting.
8) Press key to complete pattern registering
method.
9) Press key to complete setting and return to
normal mode.
key.
key to edit
key to change the
key to change the
74
– 19 –