Table of Contents
Advertisement
2)
Simulation Operation Test of Presser Foot Motor
Under this mode, step pedal to level 2 to execute
origin search, and then press
simulation operation of the motor at various work
operation such as lifting up or lowering down.
3)
Presser Foot Motor Origin Adjustment
Under this mode, stepping the pedal to level 2 to
execute the origin search. Without pressing
key, the motor will remain at the origin position A.
Press
key to change the origin adjustment
value D, and at the same time presser foot origin
sensor signal B and cutter position sensor signal D
will change correspondingly. After setting the value,
press
key to save and return. User can also
press
key or
return.
2.3.6 08 System Output Test
2.3.6 08 System Output Test
Under this mode, press
device.
2.3.7 09 Panel Test
2.3.7 09 Panel Test
Under this test, press
key to return to normal display status.
key to make
key to quit saving and
key to shift and select the device to be tested, and press
key to light up all LED lights on the panel and the full screen of LCD, and press
65
– 10 –
D
A
B
C
key to drive that
Advertisement
Table of Contents
