Upgrade Patterns Via Usb Stick - JUKI K-1E Instruction Manual

5.1 Upgrade patterns via USB stick

5.2 Upgrade the software via USB flash drive
The master, panel and stepper can be upgraded through a USB stick. The program needs to be placed in the update
directory of the USB flash drive.
(01)Upgrade the master：The file name is"m Control_6GR"；
(02)Upgrade steppingDSP1：The file name is"dsp1_6GT"；
(03)Upgrade steppingDSP2：The file name is"dsp2_6GT"；
Press the Prepare key
The upgrade progress percentage is displayed during the
upgrade process.
The upgrade progress percentage is displayed during the
upgrade process. The upgrade of the panel program, the
file name is "LCDpanel-2021", also needs to be placed in
the U disk update directory, access the U disk to the
panel USB interface under shutdown, and then press and
hold the F1, F3, F5 keys at the same time to turn on, you
can enter the upgrade interface to automatically complete
the upgrade.
Start the upgrade.
92
– 37 –