5.3 Upgrade Step Parameters and Step Curves via USB Stick
5.3 Upgrade Step Parameters and Step Curves via USB Stick
The parameters and curves of the stepper drive can be upgraded through the USB stick. The data files need to be
placed in the update directory of the U disk.
(01)Import DSP1 configuration parameters:The file name is"Dsp1StepPara_6G";
(02)Import DSP2 configuration parameters:The file name is"MStepPara_6G";
(03)Import DSP1 configuration parameters:The file name is"Dsp1StepCurve_6G";
(04)Import DSP2 configuration parameters:The file name is"MStepCurve_6G";
Press
the Prepare button to start the upgrade.
After the upgrade is complete, it prompts "Operation
successful!" ", no need to reboot to take effect new data.
93
– 38 –