Matters For Safe Using - JUKI K-1E Instruction Manual

Operation Humidity
29
Range
30 Line Voltage
 Please reduce the max sewing speed in accordance with the sewing conditions.
 Effective standard for product: QCYXDK0004—2023 "Computerized Control System for Industrial Sewing
Machine"

1.2 Matters for Safe Using

1.2 Matters for Safe Using
 Installation
Control Box

 Please install the control box according to the instruction
Attachments

 If other attachments are needed, please turn off the power and pull off the power plug.
Power Cable

 Do not press power cable with force or excessively twist power cable.
 The power cables shall be fixed with a distance at 25mm away from the rotating component at
least
 Before powering the control box, user shall carefully check the voltage of power supply and
position of power input on control box. If the power transformer is used, user should also
check it before powering the machine. At this moment, the power switch of sewing machine
must be set as "Off".
Grounding

 In order to avoid the noise disturbance and shock caused by electrical leakage, user should
ground the grounding cable.
Attachments

 If the electrical attachments are needed, please connect them to the proper positions.
Disassemble

 When removing the control box, user should turn off the power and pull off the power plug.
 At pulling off the power plug, user should hold the plug and remove it, instead of pulling the
power cable only.
 The control box contains the dangerous high voltage power. For opening the control box,
please turn off the power and take away the plug from socket firstly, and then wait for at least
5 minutes before opening the control box.
 Maintenance, Inspection and Repair
Only can the trained technicians perform the repair and maintenance of this machine.

When replacing the needles and shuttles, user has to turn off the power.

Please use the spare parts from the authorized manufacturers

 Others
Do not touch the rotating or moving part of the machine, especially the needle and belt, when the

machine is working. User should also keep his/her hair away from those moving parts, so as to
avoid the danger.
Do not drop the control device on the floor, nor insert ant stuff into the slot on the control box.

Do not run the machine without the cover shells

35% - 85% （No Dew Condensation）
AC 220V ± 10%; 50-60Hz
57
– 2 –