Table of Contents
Advertisement
at that situation by mistake.
When you tilt or erect the head of sewing machine, please use both of your hand in that operation.
And never press the sewing machine with strength.
If the sewing machine loses its balance, it will fall into floor thus causes the personal injury or
mechanical damage.
Grounding is a must.
If the grounding cable is not fixed, it may cause the electric-shock and mis-operation of machine
The entire cables shall be fixed with a distance at 25mm away from the moving component at least.
By the way, don't excessively bend or tightly fixed the cable with nails or clamps, or it may cause
the fire or electric shock.
Please add security cover on the machine head.
This sewing machine can only be used by the trained staff.
This sewing machine has no other usages but the sewing.
When operating the sewing machine, please remember to put on the glasses. Otherwise, the broken
needle will cause the personal injury in case the needle is broken.
At following circumstances, please cut off the power at once so as to avoid the personal injury
caused by the mis-operation of start switch:
1.Threading on needles; 2. Replacement of needles; 3. The sewing machine is left unused or beyond
supervision
At working, don't touch or lean anything on the moving components, because both of the above
behaviors will cause the personal injury or the damage of the sewing machine.
During working, if the mis-operation happens or the abnormal noise or smell is found at the sewing
machine, user shall cut off the power at once, and then contact the trained technicians or the
supplier of that machine for solution.
For any trouble, please contact the trained technicians or the supplier of that machine.
Only can the trained technicians perform the repair, maintenance and inspection of this sewing
machine.
For the repair, maintenance and inspection of the electrical component, please contact the
professionals at the manufacturer of control system in time.
At following circumstances, please cut off the power and pull off the plug at once so as to avoid the
personal injury caused by the mis-operation of start switch:.
1.Repair, adjustment and inspection
2.Replacement of the component like curve needle, knife and so on
Before the inspection, adjustment or repair of any gas-driven devices, user shall cut off the gas
supply till the pressure indicator falls to 0.
When adjusting the devices needing the power supply and gas supply, users can' t be too careful to
follow the entire Safety Matters for Attention.
If the sewing machine damages due to the unauthorized modification, our company will not be
responsible for it.
Sewing
Maintenance & Inspection
;
VI
iii
Advertisement
Table of Contents
