Table of Contents
Advertisement
7)
Open pattern lock: after update, if the patterns updated
via U disk cannot be selected on the sewing interface,
the possible reason is that the pattern lock is
unopened, for the default setting of patterns number
101~200 is locked and unable to be selected. User
need make the following operation:
When sewing LED is off, press
system menu, press
pattern lock" and press
Under this mode, the left part A displays the normal
pattern number, and user can press
change from 1~200; the right part B display the
pattern status, "ON" for open and "OFF" for lock.
User can press
to open or lock the pattern.
8) Use
key and
and then press
key again to return to the normal sewing mode.
to enter
key to select "03 normal
key to enter.
key to
key to open the pattern, press
91
– 36 –
A
key to save and return to the system menu,
B
Advertisement
Table of Contents
