Huawei SmartLi 2.0 User Manual page 109

SmartLi 2.0
User Manual
After removing the safety cap from the power cable of the battery at the bottom
layer, install the cable immediately to prevent the exposed terminal from touching
the shell, which may cause sparks or burns.
● When installing a copper bar, connect the part with a round hole to the upper
● Excessive bolts will be used as spare parts.
1.
2.
Issue 13 (2023-03-26)
WARNING
NO TICE
battery module, and connect the part with a slotted hole to the lower battery
module. Install the part with a round hole first, and then the part with a slotted
hole.
Open the terminal protective covers, install copper bars between battery
modules, and close the covers. Install copper bars between other battery
modules in sequence.
Figure 5-62 Installing copper bars between battery modules (using the 8+8
scenario as an example)
Open the terminal protective covers, install copper bars between battery
modules and fuses, and close the terminal protective covers.
Copyright © Huawei Digital Power Technologies Co., Ltd.
5 Installation and Cable Connection
100