Related Manuals for Kramer KT-2010
Summary of Contents for Kramer KT-2010
- Page 1 USER MANUAL MODEL: KT-2010 / KT-2010WM 10" Touch Panel P/N: 2900-301641 Rev 1 www.kramerav.com...
-
Page 2: Table Of Contents
Kramer Electronics Ltd. Contents Contents Introduction Getting Started Overview Typical Applications Defining KT-2010 / KT-2010WM 10" Touch Panel KT-2010 Tabletop Mount KT-2010WM On-Wall Mount Mounting the KT-2010 / KT-2010WM Mounting KT-2010 on a Table Mounting KT-2010WM on a Wall Connecting Options... -
Page 3: Introduction
Kramer Electronics Ltd. Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have... -
Page 4: Overview
European Advanced Recycling Network (EARN) and will cover any costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility. For details of Kramer’s recycling arrangements in your particular country go to our recycling pages at www.kramerav.com/il/quality/environment. -
Page 5: Typical Applications
Typical Applications KT-2010 / KT-2010WM is ideal for the following typical applications: • Control user interface in meeting and conference rooms, boardrooms, and auditoriums. • Presentation of room scheduling. KT-2010 / KT-2010WM – Contents... -
Page 6: Defining Kt-2010 / Kt-2010Wm 10" Touch Panel
Kramer Electronics Ltd. Defining KT-2010 / KT-2010WM 10" Touch Panel This section defines KT-2010 / KT-2010WM. Figure 1: KT-2010 / KT-2010WM 10" Touch Panel Feature Function Display Touch panel Microphone For audio communication, recording or conferencing. Proximity Sensor Automatically adjusts the screen brightness and camera according to the room lighting conditions. -
Page 7: Kt-2010 Tabletop Mount
M3 screw. For measurements see the image in Mounting KT-2010WM on a Wall on page 10. Double-sided tape For securing the wall mount bracket to the wall KT-2010 / KT-2010WM – Contents... -
Page 8: Mounting The Kt-2010 / Kt-2010Wm
Kramer Electronics Ltd. Mounting the KT-2010 / KT-2010WM KT-2010 package is for mounting the tablet on a table and the KT-2010WM package is for mounting the tablet on a wall. Always be careful when attaching or removing the 10" Touch Panel from a mount. - Page 9 ▪ Insert fingers into the two slots and slide the cover down. 2. Connect any necessary cables, running them through the table stand to the KT-2010. 3. Replace the I/O cover, taking care to prevent pressure on the RJ45 cable: ▪...
-
Page 10: Mounting Kt-2010Wm On A Wall
7). 5. Click the wall bracket (see 15 in KT-2010WM On-Wall Mount on page 7) onto the back of the I/O cover (push the bracket into place while holding its top slightly outward). KT-2010 / KT-2010WM – Contents... - Page 11 2. Connect the tablet to the wall bracket (lift it into place while holding the top of the tablet slightly outward). 3. Use the provided M3 screw to secure the tablet to the wall bracket and back cover. The tablet is mounted. (Figure KT-2010 / KT-2010WM – Contents...
-
Page 12: Connecting Options
Kramer Electronics Ltd. Connecting Options You can power the KT-2010 or KT-2010WM using any or all of the following options: 1. Connect the PoE-enabled LAN RJ-45 connector to your local area PoE-enabled network. 2. Connect the power adapter to the 12V DC connector on the rear side. The DC power supply is optional: It can be purchased separately. -
Page 13: Essential Kt-2010 / Kt-2010Wm Settings
18. By default this is set to midnight, change it if you have no internet access at this time or prefer another time. 4. Consider changing the time that the system checks for Kramer Control (APK) updates; Changing the Automated Kramer Control update on page 20. -
Page 14: Controlling Kt-2010 / Kt-2010Wm
Controlling KT-2010 / KT-2010WM Using Navigation Buttons or Gestures By default, KT-2010 / KT-2010WM run the Kramer Control app and displays its login screen at start-up. Log into Kramer Control to access the customizable interface set-up defined by your IT department. -
Page 15: Using The Home Page
To adjust the date and time settings: . The device’s Settings menu opens. 1. On the Home page, press the Settings button 2. Select Date & Time > Time zone. 3. Set the correct Region. The time will display correctly. KT-2010 / KT-2010WM – Contents... -
Page 16: Connecting To Wi-Fi Or Ethernet
5. Select a Wi-Fi SSID. 6. Check Advanced options and enter the Wi-Fi information in the fields that appear, then press Connect. 7. If you are using 802.1X authentication, then add the certificate information. 802.1X is enabled. KT-2010 / KT-2010WM – Contents... -
Page 17: Installing An 802.1X Certificate
To browse to the file location, press the 3 lines at the top left of the screen. After installing the certificates, see Connecting to Wi-Fi or Ethernet on page for instructions on using the certificates. Ethernet must be disabled before setting-up Ethernet certificates. KT-2010 / KT-2010WM – Contents... -
Page 18: Changing The Automated Firmware Update
4. To change the time that the system checks for updates, press Set check time and select a new time. 5. Press OK to close the window and then press SET. Changing (or clearing) the URL will disable the updates. KT-2010 / KT-2010WM – Contents... - Page 19 PoE or the optional power adapter (see Defining KT-2010 / KT-2010WM 10" Touch Panel on page 6). To upgrade the firmware 1. Download the firmware update file from the Kramer website at https://www.kramerav.com/product/KT-2010#Tab_Resources. ▪ Verify that you are using the correct KT-2010 / KT-2010WM firmware file as there maybe more than one firmware file available.
-
Page 20: Changing The Automated Kramer Control Update
Kramer Electronics Ltd. Changing the Automated Kramer Control update KT-2010 KT-2010WM arrive preset to check for Kramer APK (Android Application Package) updates at midnight every day. If an update is found, the device will download the update file and install it. -
Page 21: Connecting The Tablet To Kramer Control
To use Kramer Control, a connection between the tablet and the Kramer Control server must be setup. The Kramer Control connection can be configured either on the tablet itself, or by using a laptop connected to the same network as the tablet (see also https://www.manula.com/manuals/kramer/kramer-control/1/en/topic/new-kramer-tablets... -
Page 22: Scheduling A Daily Reboot
Insert a pin into the pinhole on the back (see Defining KT-2010 / KT-2010WM 10" Touch Panel on page 6) and hold for 22 seconds to reset the device to factory default values. A second pinhole on the top, can be used to restart the device by inserting a pin for a few seconds. -
Page 23: Logging Activity
Choose between 0 degrees (default), 90 degrees, 180 degrees and 270 degrees. Hiding the navigation bar 1. From the Home page, open the Settings screen 2. In the Settings menu, open Player settings and enable Fullscreen mode. The Navigation bar is no longer accessible. KT-2010 / KT-2010WM – Contents... -
Page 24: Defining An Auto-Start Playlist
The Content field in the Home page will be changed to the storage location of your content. The home page’s Content field defines the auto-start link to Kramer Control. Changing the value in this field is not recommended as it will disable Kramer Control. Defining auto-start HTML or SMIL content The device home page can be set to automatically run an HTML page or SMIL content. -
Page 25: Switching To Native Android Mode
Switching to native Android mode turns the device into a regular android device, allowing you full control of its content. Changing to native Android will disable Kramer Control. To make the switch: 1. From the Home page, open the Settings screen 2. -
Page 26: Technical Specifications
309 x 242 x 175mm (4 pcs) Weight KT-2010: 1.4kg (approximate) KT-2010WM: 1.2kg (approximate) Accessories Optional Power adapter. KT-2010 Table-top mount and screws. KT-2010WM On-wall mount bracket and screws. Specifications are subject to change without notice at www.kramerav.com KT-2010 / KT-2010WM – Contents... - Page 27 This limited warranty gives you specific legal rights, and you may have other rights which vary from country to country or state to state. This limited warranty is void if (i) the label bearing the serial number of this product has been removed or defaced, (ii) the product is not distributed by Kramer Electronics or (iii) this product is not purchased from an authorized Kramer Electronics reseller.
- Page 28 SAFETY WARNING Disconnect the unit from the power supply before opening and servicing For the latest information on our products and a list of Kramer distributors, visit our website where updates to this user manual may be found. We welcome your questions, comments, and feedback.
Need help?
Do you have a question about the KT-2010 and is the answer not in the manual?
Questions and answers