Hide thumbs Also See for KT-2010:

Advertisement

Scan for full manual
Step 1: Check what's in the box
KT-2010:
10" Tablet
KT-2010WM:
10" Tablet

Step 2: Get to know your KT-2010 / KT-2010WM

#
Feature
1
Display
2
Microphone
3
Proximity Sensor
4
Camera
5
Reset
6
Home Button
7
Restore Factory Reset Button
8
USB 3.0 Port
USB Type-C Port
9
LAN 1G(PoE) RJ-45 Port
10
11
Kensington Lock
12
12V/2A DC Connector
KT-2010 / KT-2010WM Quick Start
KT-2010
/
KT-2010WM
This guide helps you install and use your
Go to
www.kramerav.com/downloads/KT-2010
download the latest user manual and check if firmware upgrades are available.
1 Quick start guide
1 Quick start guide
Function
Touch panel
For audio communication, recording or conferencing.
Automatically adjusts the screen brightness and camera according to the room
lighting conditions.
For remote room viewing or video conferencing.
Located on the topside. Insert a pin and hold for a few seconds to restart.
Press to wake up / darken the screen.
Insert a pin and hold for 22 seconds to reset the device to factory default values.
Multipurpose port for external connection.
Multipurpose port for external connection.
Connect to the LAN for network communication.
KT-2010
/
the LAN port.
Optionally, you can connect the power adapter too (as backup).
Anti-theft security slot for locking the device.
Connect to the power adapter (optional, purchased separately).
Quick Start Guide
KT-2010
/
KT-2010WM
or
http://www.kramerav.com/downloads/KT-2010WM
Screws: 1 x M3, 2 x M2, 2 x 5/32"
Table stand
Wall bracket
Screws: 1 x M3, 2 x M2
KT-2010WM
is powered by PoE (power over ethernet) delivered through
P/N: 2 9 0 0 - 3 0 1 6 4 0 QS
for the first time.
Double sided tape
Rev: 3
to

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KT-2010 and is the answer not in the manual?

Questions and answers

Summary of Contents for Kramer KT-2010

  • Page 1 KT-2010WM: 10" Tablet 1 Quick start guide Wall bracket Screws: 1 x M3, 2 x M2 Double sided tape Step 2: Get to know your KT-2010 / KT-2010WM Feature Function Display Touch panel Microphone For audio communication, recording or conferencing.
  • Page 2 M3 screw. The table stand and tablet are now ready for use. For optimum range and performance use the recommended Kramer cables available at www.kramerav.com/product/KT-2010 Using third-party cables may cause damage!
  • Page 3 3. Use the provided M3 screw to secure the tablet to the wall bracket and back cover. The tablet is mounted. For optimum range and performance use the recommended Kramer cables available at www.kramerav.com/product/KT-2010WM. Using third-party cables may cause damage!
  • Page 4 5. Setup the Kramer Control agent: KT-2010 KT-2010WM is designed to operate with Kramer Control. There are two ways to setup the link to Kramer Control: from the tablet or from a laptop. For more information see https://www.manula.com/manuals/kramer/kramer-control/1/en/topic/new-kramer-tablets • Setting the link from the tablet: “<Kramer Control’s IP>:8000”.

This manual is also suitable for:

Kt-2010wm

Table of Contents