Advertisement
Scan for full manual
Step 1: Check what's in the box
KT-2010:
10" Touch Panel
KT-2010WM:
10" Touch Panel
Step 2: Get to know your KT-2010 / KT-2010WM
#
Feature
1
Display
2
Microphone
3
Proximity Sensor
4
Camera
5
Reset
6
Home Button
7
Restore Factory Reset Button
8
USB 3.0 Port
USB Type-C Port
9
LAN 1G(PoE) RJ-45 Port
10
11
Kensington Lock
12
12V/2A DC Connector
KT-2010 / KT-2010WM Quick Start
KT-2010
/
KT-2010WM
This guide helps you install and use your
Go to
www.kramerav.com/downloads/KT-2010
download the latest user manual and check if firmware upgrades are available.
1 Quick start guide
1 Quick start guide
Function
Touch panel
For audio communication, recording or conferencing.
Automatically adjusts the screen brightness and camera according to the room
lighting conditions.
For future use.
Located on the topside. Insert a pin and hold for a few seconds to restart.
Press to wake up / darken the screen.
Insert a pin and hold for 22 seconds to reset the device to factory default values.
Multipurpose port for external connection.
Multipurpose port for external connection.
Connect to the LAN for network communication.
KT-2010
/
the LAN port.
Optionally, you can connect the power adapter too (as backup).
Anti-theft security slot for locking the device.
Connect to the power adapter (optional, purchased separately).
Quick Start Guide
KT-2010
/
KT-2010WM
or
http://www.kramerav.com/downloads/KT-2010WM
Table stand
Wall mount for UK, EU and
USA one gang boxes
KT-2010WM
is powered by PoE (power over ethernet) delivered through
P/N:
2900- 301683QS
for the first time.
Mounting accessories
Mounting accessories
Rev:
4
to
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Kramer KT-2010
Summary of Contents for Kramer KT-2010
- Page 1 KT-2010WM: 10" Touch Panel 1 Quick start guide Wall mount for UK, EU and Mounting accessories USA one gang boxes Step 2: Get to know your KT-2010 / KT-2010WM Feature Function Display Touch panel Microphone For audio communication, recording or conferencing.
- Page 2 M3 screw. The table stand and touch panel are now ready for use. For optimum range and performance use the recommended Kramer cables available at www.kramerav.com/product/KT-2010 Using third-party cables may cause damage!
- Page 3 3. Use the provided M3 screw to secure the touch panel to the wall bracket and back cover. The touch panel is mounted. For optimum range and performance use the recommended Kramer cables available at www.kramerav.com/product/KT-2010WM. Using third-party cables may cause damage!
- Page 4 By default, KT 2010 / KT 2010WM displays the Kramer Agent interface that turns the touch panel into a controllable • device interacting with Kramer Brain / Virtual Brain room control software. The Brain IP needs to be setup (see step 6). The following setup steps are recommended before using your touch panel: 1.
Need help?
Do you have a question about the KT-2010 and is the answer not in the manual?
Questions and answers