Table of Contents
Advertisement
Only cover the burner with one layer of coals. Arrange the ember chips
on top of the burner tray. DO NOT cover the pilot with logs.
WARNING: This appliance is intended for use only with the included
Montigo burners and accessories. Never install or add any additional
or alternative media, rock wool or other material in this appliance. The
use of additional or alternative materials may pose potential safety
hazards, damage to the appliance, and void manufacturer's warranty.
A
C
D
H
G
Step 1: Logs A & B are placed directly at the middle back of the firebox.
These logs should fit together as shown.
A
Step 2: Log I is placed in front of log A in the left of the media tray.
Log L is tucked underneath log G.
I
L
40
B
M
E
F
I
J
L
B
Birch Logset Installation 46
Step 3: Log F is placed in the front of the media tray resting on log I.
Log E is placed on logs A and I.
E
F
Step 4: Place log G vertically in the middle of the media tray, charred
end down. Log J is placed at the base of log G to help stabilize.
Step 5: Rest log M with the ends on log J and B. Log D is placed in the
front right corner, charred side in.
Step 6: Log H is placed in the front right corner on log D, charred side
in. Log C rests on log B, charred side in.
Installation
DRSQ
46
G
J
M
D
C
H
XG0232 - 043021
Advertisement
Table of Contents
