4.5 Security
Use this menu to configure the following security settings for the system.
Administrator Password
Press <Enter> to create a new, or change an existing, Administrator password.
Password Check
Select Setup for the system to check for a password at Setup. Select Always for the system
to check for a password at bootup or upon entering the BIOS Setup utility. The options are
Setup and Always.
Supermicro Security Erase Configuration
This section displays the following information if a storage device is detected by the system:
•
HDD Name
•
HDD Serial Number
•
Security Mode
81
Chapter 4: UEFI BIOS