Supermicro H13SRD-F User Manual page 73

Supermicro KMS Server Configuration
Supermicro KMS Server IP address
Use this feature to enter the Supermicro Key Management Service (KMS) server IPv4 address
in dotted-decimal notation.
Second Supermicro KMS Server IP address
Use this feature to enter the second Supermicro KMS server IPv4 address in dotted-decimal
notation.
Supermicro KMS TCP Port number
Use this feature to enter the Supermicro KMS TCP port number. The valid range is 100 -
9999. The default setting is 5696.
KMS Time Out
Use this feature to enter the KMS server connecting time-out (in seconds). The default setting
is 5 (seconds).
TimeZone
Use this feature to enter the correct time zone. The default setting is 0 (not specified).
Client UserName
Press <Enter> to set the client identity (UserName). The length is 0 – 63 characters.
Client Password
Press <Enter> to set the client identity (Password). The length is 0 – 31 characters.
KMS TLS Certificate / Size
This feature displays the Transport Layer Security (TLS) certificate and its size for CA
Certificate, Client Certificate, and Client Private Key.
CA Certificate
For the CA certificate, use this feature to enroll factory defaults or load the KMS TLS
certificates from the file. The options are Update, Delete, and Export.
Client Certificate
For the client certificate, use this feature to enroll factory defaults or load the KMS TLS
certificates from the file. The options are Update, Delete, and Export.
73
Chapter 4: UEFI BIOS