Table of Contents
Advertisement
Super H13SRD-F User's Manual
Putty KeyPad
This feature selects Function Keys and KeyPad settings for Putty, which is a terminal
emulator designed for the Windows OS. The options are VT100, LINUX, XTERMR6, SCO,
ESCN, and VT400.
Legacy Console Redirection Settings
Legacy Serial Redirection Port
Use this feature to select a COM port to display redirection of Legacy OS and Legacy
OPROM messages. The options are COM1 and SOL. Note that the options displayed are
based on your motherboard.
Resolution
Use this feature to select the number of rows and columns used in Console Redirection
for Legacy OS support. The options are 80x24 and 80x25.
Redirection After BIOS POST
Use this feature to enable or disable legacy console redirection after BIOS POST. When
BootLoader is selected, legacy console redirection is disabled before booting the OS. When
Always Enable is selected, legacy console redirection remains enabled upon OS bootup.
The options are Always Enable and BootLoader.
Serial Port for Out-of-Band Management/Windows Emergency Management Services
(EMS)
The feature allows you to configure Console Redirection settings to support Out-of-Band
Serial Port management.
Console Redirection EMS
Select Enabled to use the SOL port for Console Redirection. The options are Disabled and
Enabled.
Console Redirection Settings (Available when "Console Redirection
EMS" above is set to Enabled)
Out-of-Band Mgmt Port
The feature selects a serial port in a client server to be used by the Microsoft Windows
Emergency Management Services (EMS) to communicate with a remote host server. The
options are COM1 and SOL. Note that the SOL option is unavailable if there is no BMC
support.
66
Advertisement
Table of Contents
