Table of Contents
Advertisement
9
EN
SAFETY WARNINGS & CAUTIONS
AVOID ELECTRICAL SHOCK
Check that the electric circuit is adequately protected and that it corresponds with the
power, voltage and frequency of the motor. Check that there is a ground connection,
and a regulation differential switch upstream.
Ground the log splitter. Prevent body contact with grounded surfaces: pipes, radia-
tors, ranges, and refrigerator enclosures.
Never open the pushbutton box on the motor. Should this be necessary, contact
a qualified electrician.
Mark sure your fingers do not touch the plug's metal prongs when plugging or
unplugging the log splitter.
KEEP VISITORS AND CHILDREN AWAY
The log splitter must be always operated by one person only. Other people should
keep a safe distance from the work area, especially when the log splitter is under
operations. Never use another people to help you with freeing jammed log.
INSPECT YOUR LOG
Make sure there are no nails or foreign objects in logs to be split. The ends of the logs
must be cut square. Branches must be cut of flush with the trunk.
DON'T OVERREACH
Floor must not be slippery.
Keep proper footing and balance at all times.
Never stand on log splitter. Serious injury could occur if the tool is tipped or if the
cutting tools is unintentionally contacted. Do not store anything above or near the log
splitter where anyone might stand on the tool to reach them.
AVOID INJURY FROM UNEXPECTED ACCIDENT
Always pay full attention to the movement of the log pusher.
Do not attempt to load the log on until the log pusher has stopped.
Keep hands out of the way of all moving parts.
PROTECT YOUR HANDS
Keep you hands away from splits and cracks which open in the log; They may close
suddenly and crush or amputate your hands.
Do not remove jammed logs with you hands.
DON'T FORCE TOOL
It will do a better and safer job at its design rate. Never try to split logs larger than
those indicated in the specifications table. This could be dangerous and may dam-
age the machine.
Don't use log splitter for a purpose for which it was not intended.
NEVER LEAVE TOOL RUNNING UNATTENDED
Don't leave tool until it has come to a complete stop.
DISCONNECT POWER
Unplug when not in use, before making adjustments, changing parts, cleaning, or
working on the log splitter; Consult technical manual before servicing.
5T LOG SPLITTER
USER'S MANUAL
Advertisement
Table of Contents
