EN
10
APPLICATION CONDITIONS | ELECTRICAL REQUIREMENTS
PROTECT THE ENVIRONMENT
Take used oil to an authorized collection point or follow the stipulations in the country
where the log splitter is used.
Do not discharge into drains, soil or water.
MAINTAIN YOUR LOG SPLITTER WITH CARE
Keep the log splitter clean for best and safest performance.
MAKE THE WORKSHOP CHILDPROOF
Lock the shop. Disconnect master switches. Store the log splitter away from children
and others not qualified to use it.
4. APPLICATION CONDITIONS
This log splitter is a home use model. It is designed for operating under ambient temperatures between +5
40
C and for installation at altitudes no more than 1000m above M.S.L. The surrounding humidity should less
o
than 50% at 40
C. It can be stored or transported under ambient temperatures between -25
o
5. ELECTRICAL REQUIREMENTS
Connect the main leads to a standard 230V 10% (50Hz 1Hz) electrical supply which has protection devices
of under-voltage, over-voltage, over-current as well as a residual current device (RCD) which maximum residual
current rated at 0.03A. Be sure the extension cord is no longer than 10m and the diameter of each line is no less
than 2.5mm
2
to allow sufficient current flow to the motor.
o
C and
C and 55
C.
o
o
FZLS 1005H-E