Rolled Hemming, Picot Edging And Narrow Hemming Tension Dial And Machine Settings According To The Thread And Fabric - ELNA eXtend 864air Instruction Manual

Lower looper TIGHT
pre-tension setting
slider
* Set the lower looper
pre-tension setting slider to
TIGHT after threading.
Standard setting of Right
tension dials needle
(Synthetic)
(Synthetic)
(Synthetic)
Stitch length dial
Differential feed
dial
Chaining finger
switch knob
Upper knife
Needle Using the right needle: HA-1 SP No. 11
(Remove the left needle.)
Needle thread Synthetic: No. 80 - 100
Fabric Lightweight fabric such as organdy, crepe de chine, lawn and georgette
* Refer to page 10 for details on how to remove the needle.
* Refer to page 11 for details on how to adjust the stitch length.
* Refer to page 11 for details on how to adjust the difference ratio.
* Refer to page 13 for details on how to adjust the chaining finger switch knob.
* Refer to page 12 for details on how to deactivate and activate the upper knife.
ROLLED HEMMING, PICOT EDGING AND NARROW HEMMING
Tension Dial and Machine Settings According to the Thread and Fabric
Rolled Hemming
Upper Lower
looper looper
(Synthetic) (Synthetic)
3-4 3 3
(Wooly
(Synthetic)
nylon)
4 3
1
(Wooly (Wooly
nylon) nylon)
4
1 3
R
1.0
R
The setting of tension dials may vary depending on the
type and thickness of fabric and thread being sewn.
CAUTION
Make sure to turn the power switch off before
changing the needle or setting the chaining finger
switch knob.
Picot Edging
TIGHT
* Set the lower looper
pre-tension setting slider to
TIGHT after threading.
Right Upper Lower
needle looper looper
(Synthetic) (Synthetic) (Synthetic)
2-4 3
- -
3-4
1.0
R
Activated
42
Narrow Hemming
STD.
Right Upper
needle looper
(Synthetic) (Synthetic)
3 4 3
(Wooly
(Synthetic)
nylon)
4
1
-
(Wooly
(Synthetic)
nylon)
4
1
R
1.0
R
Lower
looper
(Synthetic)
3
(Synthetic)
3
(Wooly
nylon)
3