Presser Foot Lifter Stopper Position (1) - ELNA eXcellence 780 Service Manual

Presser foot lifter stopper position (1)

The distance between the presser foot spring release base and the presser foot lifter should be in the range of 39.4
mm to 39.8 mm when the presser foot is raised with the presser foot lifter.
Presser foot lifter stopper
Presser foot spring
release base
Carrying handle
Setscrew A
supporter (front)
Connector Setscrew C
Front bracket (unit)
Setscrew D
LED cover Setscrew E
(unit)
Mechanical adjustment
39.4 to 39.8 mm
Setscrew B
View from
the front side
Setscrew F
Needle bar
Setscrew G
supporter spring
Preparation:
1. Turn the power switch ON. Press the presser foot lifter
button to lower the presser foot. Turn the power switch
OFF.
2. Raise the presser foot with the presser foot lifter.
3. Remove the top cover (see page 2).
4. Disconnect the connector from the face cover.
Loosen the setscrew A.
Remove the setscrews B and C.
Remove the carryin handle supporter (front).
5. Remove the setscrew D and the LED cover (unit).
Remove the needle bar supporter spring.
Loosen the setscrew E.
Remove the setscrews F and G.
Remove the front bracket (unit).
35