Test Stitching Starting Sewing; Finishing Sewing - ELNA eXtend 864air Instruction Manual

Hide thumbs Also See for eXtend 864air:

Table of Contents

TEST STITCHING

Starting Sewing

z Close the side cover and the looper cover.

Turn the power switch ON.

x Make sure that the upper knife is activated (in the

raised position).

c Lower the presser foot lifter.

v Draw all of the threads back under the foot. Slowly

run the machine and produce a 2˝ (5 cm) thread chain

while gently pulling the thread chain to the back.

Check the chain.

b Insert the fabric under the toe of the foot. (You do

not need to raise the foot.) Start sewing slowly. The

fabric will automatically be fed. Guide the fabric in the

desired direction.

* For heavyweight fabric, raise the presser foot and

insert the fabric in front of the knife. Lower the foot

and start to sew while guiding the fabric.

z After stitching is complete, continue to slowly produce

approximately 5˝ (12 cm) of thread chain while gently

pulling the thread chain to the back.

x Cut the threads with the thread cutter as illustrated,

leaving a thread chain approximately 2˝ (5 cm) long

on the end of the fabric.

q Thread cutter

Table of Contents