Setting The Auto Power Off Function; Turning On/Off The Screen Backlight - Sanyo ICR-EH800D Instruction Manual

Setting the auto power off function

If you specify a time for this function, when
the unit is not used for the specified time, the
power turns off automatically (excluding pause
during recording and VAS recording, as well
as playback). This function helps you save
battery when you forget to turn off the power.
Turn on the power, and press
1
the MENU/PLAY LIST button.
Press the VOL (+/–) button to
2
select "COMMON MENU", and
then press the
Press the VOL (+/–) button to
3
select the "AUTO POWER OFF"
setting, and then press the
/OK button.
Press the
4
select a time for the auto power
off function to activate, and
then press the
SD ST
A
MIC
【AUTO OFF】
OFF(0)~15min(15)
15min
0 15
• You can set the time in 1-minute increments.
• If the "AUTO POWER OFF" setting is "OFF",
the auto power off function is disabled.
Press the MENU/PLAY LIST button
to exit the menu.
/OK button.
/ button to
/OK button.

Turning on/off the screen backlight

Use this function to specify how long the
screen backlight stays on after you press a
button.
Turn on the power, and press
1
the MENU/PLAY LIST button.
Press the VOL (+/–) button to
2
select "COMMON MENU", and
then press the
Press the VOL (+/–) button
3
to select the "BACKLIGHT"
setting, and then press the
/OK button.
Press the VOL (+/–) button to
4
select "OFF", "5sec", "15sec",
or "ON", and then press the
/OK button.
OFF: No backlight
SD ST
A
MIC
5sec: Backlight stays on for
【BACKLIGHT】
5 seconds after you press a button.
OFF
5sec
15sec: Backlight stays on for
15sec
ON 15 seconds after you press a button.
ON: Backlight always stays on.
Press the MENU/PLAY LIST button
to exit the menu.
• When shipped, the unit is set to "15sec".
• If the battery is low, the backlight may not
come on.
/OK button.
107