Download Print this page

Elation FUZ567 User Manual page 32

Advertisement

R E M O T E D E V I C E M A N A G E M E N T ( R D M )
NOTE: In order for RDM to work properly, RDM enabled equipment must be used
throughout the entire system, including DMX data splitters and wireless systems.
Remote Device Management (RDM) is a protocol that sits on top of the DMX512 data
standard for lighting, allowing the DMX systems of the device to be managed, modified,
and monitored remotely (hence, remote device management). This protocol is ideal for
fixtures installed in locations that are not easily accessible.
With RDM, the DMX512 system becomes bi-directional, allowing a compatible RDM
enabled controller to send out a signal to devices on the wire, as well as allowing
the fixture to respond (known as a GET command). The controller can then use it's
SET command to modify settings that would typically have to be changed or viewed
directly via the unit's display screen, including the DMX Address, DMX Channel Mode,
and Temperature Sensors.
FIXTURE RDM INFORMATION:
RDM Code
0×22A6
Please be aware that not all RDM devices support all RDM features, and therefore it
is important to check beforehand to ensure that the equipment that you are considering
includes all of the features that you require.
The following parameters are accessible in RDM on this device:
[0x0200] Sensor Definition
[0x0201] Sensor Value
[0x0080] Device Model Description
[0x0081] Manufacturer Label
[0x0082] Device Label
[0x00E0] DMX Personality
[0x00E1] DMX Personality Description
[0x0400] Device Hours
[0x0015] Comms Status
[0x0031] Status ID Description
[0x0032] Clear Status ID
[0x0402] Lamp Strikes
[0x0404] Lamp Mode
[0x0405] Device Power Cycles
[0x0600] Pan Invert
[0x0601] Tilt Invert
Device ID
0013 0000-FFFF
32
Device Model ID
0013
[0x0602] Pan Tilt Swap
[0x0500] Display Invert
[0x0501] Display Level
[0x0603] Realtime Clock
[0x1010] Power State
[0x1031] Preset Playback
[0x0122] Default Slot Value
[0x00B0] Language
[0x00A0] Language Capabilities
[0x00C2] Boot Software Version Label
[0x00C1] Boot Software Version ID
[0x0070] Product Detail ID List
[0x0030] Status Messages
[0x1001] Reset Device
[0x0014] Undefined PID [0x0014,(20)]
Personality ID
21Ch Standard(1)
30CH Extended(2)
19CH CMY(3)
24CH CMY Ex(4)
20CH RGB(5)
26CH RGB EX(6)

Advertisement

loading

This manual is also suitable for:

Fuze wash 500