Advertisement
I N S TA L L AT I O N G U I D E L I N E S
FIXTURE INSTALLATION
The Elation Fuze Wash 500 is fully operational in three different mounting positions, hanging
upside-down, mounted sideways on trussing, or set on a flat level surface. Be sure this fixture
is kept at least 0.2m (7.9in.) away from any flammable materials (decoration etc.). Always use
and install the supplied safety cable as a safety measure to prevent accidental damage and/or
injury in the event the clamp fails. Never use the carrying handles for secondary attachment.
ART-NET | sACN CONNECTION
When connecting fixture to a network switch to control multiple devices, a Gigabit Ethernet
Switch that supports IGMP (Internet Group Management Protocol) is required. Using a Gigabit
Ethernet Switch that does not support IGMP can cause erratic behavior of all connected
devices to the switch. Click link below for more information about IGMP.
https://en.wikipedia.org/wiki/Internet_Group_Management_Protocol
*SAFETY CABLE*
ALWAYS ATTACH A SAFETY CABLE WHENEVER
INSTALLING THIS FIXTURE IN A SUSPENDED
ENVIRONMENT TO ENSURE THE FIXTURE WILL
NOT FALL IF THE CLAMP FAILS.
19
Advertisement
