Advertisement
A C C E S S O R Y I N S TA L L AT I O N : B A R N D O O R S
Barndoor Connector Socket
1. Place fixture on the stable flat surface and let cool for 15mins.
2. Before mounting Barndoors, orient the Barndoor assembly to match its Safety Cable/Coil
Cable and Connector to the coresponding receptical and Safety Cable Attachment Point
on the moving head. Make sure that the indentation on the inner edge of the barndoors is
aligned with the gear on the front of the fixture. This should also result in the 4 screw holes
on the barndoors being correctly aligned with the 4 screw holes on the fixture.
3. Carefully, using a hand screwdriver, insert/secure included 4 screws.
4. Check Snoot to confirm it is seated properly and all 4 screws are secure.
DO NOT OVER TIGHTEN SCREWS! DO NOT USE A POWER SCREWDRIVER!
Coil Cable &
Connector
Accessory Safety Cable
Attachment Point
15
Safety Cable
Advertisement
