Technical Data - Ahlborn ALMEMO 500 Supplementary Instructions Manual

6 Technical Data

RTA6 Slide-in Module ES 500-RTA6
Trigger inputs
Relay
Analog outputs
0.0...10.0 V
0.0...20.0 mA
Accuracy
Temperature drift
Output rate
Voltage supply
Current consumption
Slide-in module
Subject to technical modifications without prior notice!
- 22 –
Optocoupler 4 to 30 V, Ri > 3 kΩ
Solid-state relay 50 V, 0.5 A, 1 Ω
10 V or 20 mA (programmable)
16 bit DAC, galvanically isolated
0.5 mV/digit, load > 100 kOhm
1 μA/digit, load < 500 Ohm
± 0.1 % of MV. ± 0.1 % of EV
10 ppm/K
A total up to 100 events/s
for an installation with 1 RTA slide-in module
®
Via ALMEMO 500 data logger
Standard: ca. 10 to 20 mA
2 analog outputs: approx. 15 mA + 1.8·I
19" 8TE (2 slide-in locations)
Out