Capturing Intraoral Images; Capturing Single Intraoral Images - KaVo ProXam iS Instructions For Use Manual

Table of Contents

7 Capturing intraoral images

Steps

KaVo ProXam iS

When connecting the sensor for the first time the message

calibration files appears on the Romexis window. Also, if you connect the

same sensor to another workstation the files will be loaded again.

1. Click the intraoral exposure button on the main page of the 2D module or

on the top toolbar to initiate the intraoral image capture mode

Intraoral Exposure window appears.

The

When the X-ray unit is getting ready for exposure, the message

for Ready appears on top of the window.

2. Prepare the patient for exposure, select exposure parameters and

position the intraoral X-ray unit as required, for more information refer

to the unit's user's manual/Instructions for use.

NOTE

Inform the patient that the sensor may feel warm in the mouth.

When the intraoral sensor system is ready for exposure the message

Waiting for Exposure appears on top of the window.

3. Take an exposure as usual.

After the exposure the message Saving the image appears on the

display and the image is automatically stored into the database.

4. Define the tooth numbers and sensor orientation.

The sensor orientation is indicated in the image by a grey triangle.

Waiting

Instructions for use

Table of Contents