PRESYS
⏐ Instruments
DMY-2030-F / DMY-2030-F Light
Plug-in of output 1
Plug-in of output 2
Plug-in of output 3 Plug-in of output 4
Plug-in of communication
Power Supply Board
CPU Board
Fig. 19 - Optional module connectors
The connectors in the Power Supply Board are called MOD 1, MOD 2, MOD 3
and MOD 4, and are associated, in this order, with the signals of output 1, output 2,
output 3 and output 4 in the Indicator output terminals as shown in Figure 3. The
connector for the communication module is placed in the CPU Board and has no label.
Any optional module must be always installed with the component side in the direction of
the Display Board, as shown in Figure 20.
Fig. 20 - Installation of optional modules
Maintenance
Page 28