Table of Contents
Advertisement
PRESYS
⏐ Instruments
Note that the output terminals will present the signals only if the
corresponding optional module is installed and the output is correctly configured.
For the analog outputs, refer to section 3.2 on Configuration and 4.4 on Optional
Module Connection for further details on installation and configuration of optional
modules.
(*) Position of relay contacts when SAFE option is enabled (see section 3.2 on Configuration), the Indicator is powered on
and in non-alarm condition. When the Indicator is powered off or in alarm condition with SAFE option disabled, the position
of the relays changes.
(**) Retransmitter output 2 only for DMY-2030-F.
Fig. 6 - Output Connection
DMY-2030-F / DMY-2030-F Light
Installation
Page 9
Advertisement
Table of Contents
