Presys DMY-2030-F Technical Manual page 26

PRESYS
⏐ Instruments
Level 4 - Output
Level 4 allows the configuration of up to
two analog outputs (refer to Figure 14).
The table below refers to the ranges of the parameters shown in Figure 14.
Mnemonic
LIM LOW
LIM HIGH
ENG LOW
ENG HIGH
The analog output is enabled only after selecting the range of output
retransmission from the RANGE mnemonic.
Fig. 14 - OUTPUT level options
Parameters
output signal
associated with
Eng Low
output signal
associated with
Eng High
display indication
associated with
Lim Low
display indication
associated with
Lim High
DMY-2030-F / DMY-2030-F Light
(1) IT FOLLOWS THE SAME OPTIONS OF OUTPUT 2
(2) ONLY FOR DMY-2030-F
Range
0.0 to 100.0
0.0 to 100.0
-9999 to 30000
-9999 to 30000
Factory Unit
Value
0.0 %
100.0 %
0 EU
1000 EU
Operation
Page 23