Travis Industries Fire Garden 40x24 Single Sided Manual page 33

Finalizing the Installation

Locate the fireback clips and self-tapping
screws in the stove pack.
Single-sided fireplaces use 7 clips and
screws.
See-Through fireplaces use 4 clips and
screws.

Use a 1/4" nut driver to remove the screws
from the outer edge of the media tray.
NOTE: See through fireplace will only have (4)
screws ((2) on each end).

Use the screws removed in the previous step
to secure the fireback clips to the media tray,
holding the firebacks in place.

When all the panels are in place and secured,
replace the (2) media tray end pieces and
proceed with the firebox setup.
© Travis Industries, Inc. 3/20/23 - 1580
(qualified installers only)
ODL Fireplaces
33