User Manual for ALP442e & ALP442e-MIC
9.3 Managing the routing and mixing of input signals
Click on the
icon to access the "Matrix" view which is used to mix/route input signals towards
the outputs
From the bottom bar of the MATRIX view, select the ALP card to display its matrix.
For each ALP card, the internal mixer can mix all or some of the input signals towards each output.
Each output can therefore receive its own mix of inputs.
As in the "I/O Monitor" view, it is possible to select the inputs displayed in this matrix (physical inputs-
INPUTS and/or software play inputs-PLAYBACK) and the outputs displayed (physical outputs-
OUTPUTS and/or outputs-RECORD).
There are two possible matrix views:
A complete view that shows all the mixing points. This view is displayed when the "MATRIX
●
MODE" selector is positioned on "ADVANCED" (view displayed above).
A reduced view which displays a sub-assembly of mixing points. This view is displayed when
●
the "MATRIX MODE" selector is positioned on "REDUCED" (below).
It allows to route left input channels of the matrix to its left output channels, and the right
input channels to its right output channels
ALP882e & ALP882e-MIC
,
29