Card Detected By The Digigram Alp-X Manager Application; Card Availability Under Asio - Digigram ALP442e User Manual

User Manual for ALP442e & ALP442e-MIC
Note
The output WDM device level setting, accessible from the Windows Sound control panel, is
coupled to the corresponding input level setting of the card's onboard mixer, and impacts left
and right channels.
Note that after the first installation of the card, the default gain settings are as follows:
Input analog gains are set to -24 dB (+24 dU -> 0 dBfs).
●
Digital input and output gains are set to 0 dB
●

7.4.2 Card detected by the Digigram ALP-X Manager application

The ALP-X Manager application, installed with the driver, is used to control the ALP card settings via a
graphic interface. This application can be launched from the shortcut created on the desktop or from
the start menu, Digigram group. The card must appear as below if it and its driver are installed
correctly. Note that a maximum of eight ALP cards can be displayed and handled in ALP-X Manager.

7.4.3 Card availability under ASIO

If the ASIO driver for the card has been installed (option to be selected during the installation
procedure), then the card must be detected and displayed in the ASIO control panel.
This control panel can be started from the ASIO application to select the appropriate audio devices.
ALP882e & ALP882e-MIC
,
18