Display Of Gpios And Control Of Gpos; Creating, Saving And Loading Sessions; Updating The Firmware - Digigram ALP442e User Manual

User Manual for ALP442e & ALP442e-MIC ALP882e & ALP882e-MIC
,

9.4 Display of GPIOs and control of GPOs

Click on the icon to access the view that displays the state of the card's GPIO, from which the
GPO can be activated/deactivated.
From the bottom bar of the GPIOs view, select the ALP card to display the status of its GPIOs.
The status of the GPIs is displayed on the left, and the state of the GPO is displayed on the right.
To position the state of a GPO manually, click on the "STATE" switch matching this GPO to move it to
the desired position: Open or Close.

9.5 Creating, saving and loading sessions

The current configuration of all settings defined in ALP-X Manager can be saved. Go to the File menu
and select "Save session as".
To load a settings configuration, go to the File menu and select "Open session".
To create a new configuration from blank settings, go to the File menu and select "New session".
To save the settings during an existing session, go to the File menu and select "Save".
9.6 Firmware update procedure
The ALP card on-board firmware may have to be upgraded, and updates can be supplied by Digigram
and prove necessary.
32