Table Of Contents - Digigram ALP442e User Manual

User Manual for ALP442e & ALP442e-MIC
1 INTRODUCTION
2 IMPORTANT NOTICE
3 BOX CONTENTS
4 GENERAL CHARACTERISTICS
4.1 Main hardware characteristics
4.2 Main software characteristics
4.3 Routing audio streams in the card
5 REQUIRED CONFIGURATION
5.1 Required hardware configuration
5.2 Necessary software configuration under Windows
5.3 Necessary software configuration under Linux
6 HARDWARE INSTALLATION
6.1 Preparing the card
6.2 Installing the card
6.3 State of internal LED
7 SOFTWARE INSTALLATION UNDER WINDOWS
7.1 Very first installation
7.2 Updating the driver version
7.3 Updating the firmware
7.4 Verifying the card installation
7.4.1 Presence of playback and recording devices
7.4.2 Card detected by the Digigram ALP-X Manager application
7.4.3 Card availability under ASIO
7.5 Replacing a card
7.6 Changing the order of installed cards
8 UNINSTALLING THE DRIVER UNDER WINDOWS
9 CONFIGURING THE CARD UNDER WINDOWS VIA THE ALP-X MANAGER APPLICATION
9.1 Sampling clock management
9.2 Managing input and output levels
9.3 Managing the routing and mixing of input signals
9.4 Display of GPIOs and control of GPOs
9.5 Creating, saving and loading sessions
9.6 Updating the firmware
9.7 Keyboard shortcuts
10 ASIO CONTROL PANEL for Windows
ALP882e & ALP882e-MIC
,

TABLE OF CONTENTS

5
6
7
7
7
7
8
11
11
13
13
14
14
14
14
15
15
16
16
17
17
18
18
20
20
20
22
22
24
29
32
32
32
34
35
2