Table of Contents
Advertisement
User Manual for ALP442e & ALP442e-MIC
2 IMPORTANT NOTICE
Certifications
The product is currently being certified.
This product has been designed in accordance with the following standards:
EMC Directive 2014/30/EU.
●
FCC Rules Part 15, Subpart B.
●
To ensure compliance with the standards listed above, the following rules must be followed:
The cable supplied must not be modified.
●
The additional cables used must have their respective shielding connected at each end.
●
Caution
An electrostatic discharge (ESD) can damage the card components. Take the
following precautions to avoid such damage when handling the card:
Connect the card and everything entering into contact with it to the earth potential by providing a
conductive surface and discharge paths. Take these precautions as a minimum:
Unplug all power and signal sources.
●
Place the card on an earthed conductive work surface.
●
Connect to the earth potential using an anti-static strap or by holding an earthed object.
●
Earth all the tools entering into contact with the card.
●
Given the shortened length of the PCI EXPRESS
mechanical stability, we strongly advise against transporting the cards installed in a computer,
unless its chassis or case has a device for holding the card firmly in place to avoid material
damage.
ALP882e & ALP882e-MIC
,
connector and the resulting lack of
TM
6
Advertisement
Table of Contents
