Table of Contents
Advertisement
User Manual for ALP442e & ALP442e-MIC
7 SOFTWARE INSTALLATION UNDER WINDOWS
IMPORTANT
To install the software, you must have administrator rights on the computer.
Please visit the Digigram website at
Should you use a specific application developed or installed by a Digigram partner, this may mean
using a specific driver version. In this case, confirm with your application supplier which driver version
to use.
Any driver downloaded from our website has to be unpacked before installing it. Double click on the
downloaded file to start the auto-extraction utility. You can choose the default destination (temporary
Windows folder) or select another one.
7.1 Very first installation
Switch off the computer and insert the ALP card(s) in an available PCIe slot.
●
Restart the computer.
●
Click on Cancel if the "New device detected" wizard appears.
●
Double click on the ALP driver installation file "ALP-X Kit vxx.exe"
●
ALP882e & ALP882e-MIC
,
www.digigram.com
to obtain the most recent driver.
Click on Next to continue with the
installation.
Click on "I agree" to continue with the
installation.
In this window, select the components to be
installed in addition to the card driver.
ALP-X Manager: application used to
●
configure the settings of the ALP card(s)
installed.
Some software programs may have been
designed with the ALP card settings
controls built in. In this case, it may be
recommended not to install the ALP-X
Manager application.
ALP-X ASIO Settings: this application is
●
used to configure the ASIO driver
15
Advertisement
Table of Contents
