Table of Contents
Advertisement
3. Conditional:
page 85 )
4. Conditional:
(see page 87 )
5.
Remove the server module cover
6.
Remove the riser card from the server module
7.
Detach the four-port Ethernet PCI card from the riser card
91 )
8.
Detach the two-port Ethernet SFP+ PCI card from the riser card
page 93 )
9.
Detach the SAS PCI cards from the riser card
10.
Reinsert the riser card into the server module
11.
Remove the SSDs from the server module
12.
Remove the airflow baffle from the server module
13.
Remove the memory cards from the server module
14.
Remove the heat sinks from the server module
15.
Remove the CPUs from the server module
16.
Reinsert the airflow baffle into the server module
17.
Put the cover back on the server module
18.
Pack the server module
Step 17a (conditional): Remove the server module from the rack
If the S30 Node was returned racked, you need to remove the server
module from the rack.
Step 17: Unrack, disassemble, and pack the server modules
Remove the outer server module rails from the rack
Insert the inner server module rails into the outer rails
(see page 113 )
Chapter 4: Refurbishing an HCP S30 Node
HCP S Series Node Refurbishment
(see page 88 )
(see page 89 )
(see page 95 )
(see page 98 )
(see page 99 )
(see page 103 )
(see page 103 )
(see page 104 )
(see page 105 )
(see page 112 )
(see page 113 )
(see
(see page
(see
83
Advertisement
Table of Contents
