Hitachi Content Platform S Series Manual page 110

Step 17: Unrack, disassemble, and pack the server modules
To remove the SSDs from the server module:
1. Lift the black cable inside the server module out of the way to expose the
SSDs.
2. Remove the first SSD from the server module. To do this:
a. Disconnect the power cable for the SSD from the small white power
100
connector on the motherboard. To disconnect the cable, grasp the
cable just above the connector and pull up firmly but gently.
Chapter 4: Refurbishing an HCP S30 Node
HCP S Series Node Refurbishment