Table of Contents
Advertisement
Refurbishing an HCP S30 Node
The components of an HCP S30 Node are:
•
Three through 16 enclosures. The first three enclosures each have 30
SATA hard disk drives and two SSDs installed in them. The rest of the
enclosures each have 32 SATA hard disk drives and no SSDs installed in
them.
•
Optionally, one or more upgrade kits that each consist of 28 SATA hard
disk drives.
•
A front panel and light pipe assembly for each enclosure
•
One set of enclosure mounting rails for each enclosure (two inner rails
and two outer rails).
•
Two IEC 320 C19 to IEC 320 C20 power cables for each enclosure.
•
Two server modules, each containing a riser card.
•
For each server module, these additional internal components:
Two CPUs
¡
Two heatsinks
¡
Sixteen memory cards
¡
Two SSDs
¡
Two SAS PCI cards
¡
Optionally, a two-port Ethernet SFP+ PCI card
¡
A four-port Ethernet PCI card
¡
Chapter 4: Refurbishing an HCP S30 Node
HCP S Series Node Refurbishment
4
57
Advertisement
Table of Contents
