Step 17P: Reinsert The Airflow Baffle Into The Server Module - Hitachi Content Platform S Series Manual

Step 17: Unrack, disassemble, and pack the server modules
10. Press and release the knob on the top part of the CPU insertion tool to
release the CPU from the clamp. When this is done correctly, you should
hear a click.

Step 17p: Reinsert the airflow baffle into the server module

To reinsert the airflow baffle into the server module, set the airflow baffle
straight down into the server module so that:
•
The small tabs on the front edge of the baffle fit into the notches on the
lip of the fan section
•
The lips of the large tabs on the front edge of the baffle fit into the slots
in the lip of the fan section
112
Chapter 4: Refurbishing an HCP S30 Node
HCP S Series Node Refurbishment