Table of Contents
Advertisement
IDE Primary Master
This field is used to configure the IDE Hard Disk installed in the system.
Move the cursor to highlight the IDE Primary Master field:
IDE Primary Master
Pressing the <Enter> key at this point will reveal the IDE Primary Master
submenu:
IDE HDD Auto-Detection
IDE Primary Master
Access Mode
Capacity
Cylinder
Head
Precomp
Landing Zone
Sector
: Move
F5:Previous Values
Note!
Note!
the configuration information supplied by the manufacturer of your hard drive.
Incorrect settings can result in your system not recognizing the installed hard
disk.
IDE HDD Auto-Detection
Press Enter while this item is highlighted if you want the Setup Utility to
automatically detect and configure a hard disk drive on the IDE channel.
Note!
Note!
more than one line will appear in the parameter box. Choose the line that lists
LBA for an LBA drive.
Phoenix – AwardBIOS CMOS Setup Utility
Enter : Select
+/-/PU/PD:Value:
F6:Fail-Safe Defaults
Before attempting to configure a hard disk drive, make sure you have
If you are setting up a new hard disk drive that supports LBA mode,
Press Enter 8448 MB
IDE Primary Master
Press Enter
Auto
Auto
8448 MB
16368
16
0
16367
63
F10: Save ESC: Exit
Item Help
Menu Level
To auto-detect the
HDD's size, head . . . on
this channel
F1:General Help
F7:Optimized Defaults
67
Advertisement
Table of Contents
