Table of Contents
Advertisement
Before installing and using the PT-9000 POS Terminal, take note of the
following precautions:
Read all instructions carefully.
Do not place the unit on an unstable surface, cart, or stand.
Do not block the slots and openings on the unit, which are
provided for ventilation.
Only use the power source indicated on the marking label. If
you are not sure, contact your dealer or the Power Company.
The unit uses a three-wire ground cable, which is equipped
with a third pin to ground the unit and prevent electric shock.
Do not defeat the purpose of this pin. If your outlet does not
support this kind of plug, contact your electrician to replace
your obsolete outlet.
Do not place anything on the power cord. Place the power cord
where it will not be in the way of foot traffic.
Follow all warnings and cautions in this manual and on the unit
case.
Do not push objects in the ventilation slots as they may touch
high voltage components and result in shock and damage to
the components.
When replacing parts, ensure that your service technician uses
parts specified by the manufacturer.
When service or repairs have been done, ensure that the
service technician performs routine safety checks to verify that
the system is operating correctly.
Avoid using the system near water, in direct sunlight, or near a
heating device.
Cover the unit when not in use.
CB/UL/CUL/CE/FCC/BSMI Approval/VCCI
S
I
S
I
A
F
E
T
Y
N
F
O
R
A
F
E
T
Y
N
F
O
R
M
A
T
I
O
N
M
A
T
I
O
N
Advertisement
Table of Contents
