Elevator Assembly
Ø Elevator Servo Installation
1. Find
a
60-core extension cable on
sticker, then connect it with elevator servo.
2. Find the white polyester thread in
pull it until the servo is placed into the opened servo hole.
3. Run the elevator servo extension wires through the conduit
located inside the fuselage and then place the extension wires
into frame holes.
4. Secure the servo using the screws.
Ø Horizontal Tail
1. Carefully locate the slot which has been made on
horizontal tail, lightly cut through the covering but not
into the balsa sheeting.
Installation
Zhuhai Edge Smart Drive Technology Co., Ltd.
www.omphobby.com
the
fuselage, tear off the
the
fuselage frame,
gently