Advertisement
Cowl Part Assembly
Ø Cowl , Propeller, Spinner Installation
1. Install cowl to fuselage (please take note that motor
must be in center position)
2. Remove
the propeller spinner adapter
install the
aluminum spinner back-plate,
propeller spinner adapter
succession.
3. Secure the spinner with screws, please pay attention
that spinner must be located in the centre position of
the
cowl, and spinner edge is parallel to the cowl, gap is
about 1.5mm.
4. Secure the cowl
sides.secure
and screw gasket in
with screws, two screws for each of two
Zhuhai Edge Smart Drive Technology Co., Ltd.
www.omphobby.com
and screw gasket,
propeller,
Advertisement
