Advertisement
Elevator Assembly
Ø Horizontal Tail Installation
2. Use sand paper to roughen the root of control arm. Try to
insert it into the mounting slot to adjust the position at
first, then take it out, apply glue to the slot and the root
of the control arm, insert it to the slot to secure it.
3. Remove the secured plate used for filling the horizontal
tail slot,
insert the horizontal tail into fuselage, please take
note that it must be
4. Insert secured plate to
gluing the gap all around the horizontal tail.
fully inserted into the fuselage.
fill
the horizontal tail slot, use 502
Zhuhai Edge Smart Drive Technology Co., Ltd.
www.omphobby.com
Advertisement
