F&F LE-01MR v2 User Manual page 18

domestic and industrial automation
Calculating power de-
12
mand
The period of calculat-
13
ing power demand
Configuration of the
14 measured values indi-
cated on the display
15 PIN
LE-01MR v.2 – User manual v.1.0.0
0x1010 4112 R/W
0x1011 4113 R/W
0x1012 4114 R/W
0x1016 4118 R/W
Energy returned (ex-
2
port)
3 Import + Export
4 Import- Export
Value Operation
Power demand is cal-
culated on the basis of
0
successive, full time in-
tervals
1
Power demand calcu-
lated on the basis of
1 the moving average
over a given period of
time
Value in minutes. Setting range
1
from 1 to 30 minutes.
Parameter that allows you to limit
the number of measured values
visible on the LCD.
Each parameter corresponds (in
order as shown in the LCD descrip-
tion table) to one bit of that param-
eter. Bit set to 1 means the meas-
urement is visible on the LCD, bit
set to 0 means the parameter is not
4
visible.
Note: the data is stored in the two
upper registers (0x1014-0x1015).
Note: If the entire parameter is re-
set, no values will be displayed on
the meter screen.
1
The PIN code restricts access to the
18